This one stop page features all of our teaching resources for our own kits, as well as cutting files, and other resources for kits we sell. Contents:
- Kitronik e-textiles teaching resources.
- Kitronik electronic kit teaching resources.
- 3rd party teaching resources.
- DXF cutting files.
- Autodesk models.
- Discontinued products teaching resources.
Kitronik E-Textiles Teaching Resources
-
27xx – Sewable LED kit resources
The sewable LED kits allow a number of LEDs to be added to a textiles project. Teaching Resources.
Kitronik Electronic Kit Teaching Resources
-
2101 – Alarm kit
Using a dual 555 timer this kit is an alarm with exit delay and silencing timer. Teaching Resources.
-
2102 – Battery tester kit
The battery tester uses an op amp IC to generate 3 battery level thresholds shown on LEDs. Teaching Resources.
-
2103 – Game kit
The game kit has a pre-programmed PIC which gives a memory & reactions game in one. Teaching Resources.
-
2104 – Timer kit
A dual 555 timer in this kit is used to turn on an LED for a period after which a buzzer sounds. Teaching Resources.
-
2105 – Xylophone kit
The xylophone kit has a pre-programmed PIC which plays notes when the keys are pressed. Teaching Resources.
-
2106 – Rear bike light kit
Two high brightness red LEDs in this kit flash alternatively to making a rear bike light. Teaching Resources.
-
2107 – Terminal block steady hand
The terminal block steady hand game, requires no soldering. Teaching Resources.
-
2108 – Steady hand with latch
A simple board in this kit allows an LED to be latched when the loop touches the track. Teaching Resources.
-
2109 – Electronic dice kit
Using a pre-programmed PIC the LEDs in this kit randomly show a number when the button is pressed. Teaching Resources.
-
2110 – Thermometer kit
The LEDs on the thermometer kit light to show the temperature. Teaching Resources.
-
2111 – Easy build timer kit
When the button is pressed the LED in this kit changes colour for a given delay. Teaching Resources.
-
2112 – Light activated switch
This board allows an LED or other electronic device to switch on light or dark. Teaching Resources.
-
2113 – Heat activated switch
This board allows an LED or other electronic device to switch on hot or cold. Teaching Resources.
-
2114 – Mini torch kit
The mini torch is a simple kit containing a battery, switch and bright white LED. Teaching Resources.
-
2116 – Quiz buzzer kit
The quiz buzzer indicates which of two people was first to press their button. Teaching Resources.
-
2117 – Square wave generator kit
This kit generates a square wave, which when connected to a speaker makes a tone. Teaching Resources.
-
2118 – Seven segment counter kit
The 7 segment display shows a number 0 to 9 and can be counted up or down. Teaching Resources.
-
2120 – Colour changing night light
The LED in this kit automatically turns on when it goes dark and cycles through various colours. Teaching Resources.
-
2122 – Programmable music box
The music box plays a simple tune (chosen by the student) when the switch is activated. Teaching Resources.
-
2123 – Air freshener kit
When the button is pressed in this kit the fan runs for a period of time. Teaching Resources.
-
2126 / 2127 – PIC dev / project
The 2126 / 2127 PIC boards have 2 inputs & 3 outputs that can be used as needed for any project. Teaching Resources.
-
2131 – Colour USB lamp kit
This board allows a colour changing LED to be powered from a PCs USB port. Teaching Resources.
-
2132 – White USB lamp kit
This board allows a white LED to be powered from a PCs USB port. Teaching Resources.
-
2133 – Light up decoration
This set of instructions for this kit show to cut the plastic and assemble the electronics. Teaching Resources.
-
2134 – Solar garden light kit
In this kit the white light turns on at night and charges during the day. Teaching Resources.
-
2139 – Timed night light
A light that turns on at dusk and then automatically turns off after up to half an hour. Teaching Resources.
-
2140 – Wireless steady hand game
With this steady hand game the person using the game is the wire connection to the loop. Teaching Resources.
-
2141 – Deluxe stereo amplifier
A deluxe version of the amplifier with volume control, power socket & power switch. Teaching Resources.
-
2143 – High power amplifier
This amplifier kit can output up to 15W per channel into a pair of high quality speakers. Teaching Resources.
-
2144 – Relay board
This easy to configure board allows most sensors to activate a relay output. Teaching Resources.
-
2145 – Coin cell power board
This simple kit offers a compact alternative to using two AA batteries. Teaching Resources.
-
2146 – LED picture frame
This kit allows you to illuminate the edge of a picture frame using a number of LEDs. Teaching Resources.
-
2148 – Squeezy torch kit
A simple solder free squeezy torch kit, no soldering required. Teaching Resources.
-
2149 – Record playback kit
Record a short memo and play it back with this kit, record up to 10 seconds of audio.. Teaching Resources.
-
-
2153 – Solar powered buggy
A mechanical buggy kit, that moves using the power of the sun. Teaching Resources.
-
2155 – 5V LED Desk Lamp Kit
This 5V LED lamp module offers a really bright light, which is compact and easy to mount. It can be run from a 5V power supply and outputs around 16,000 mCd. Teaching Resources.
-
2157 – FM Radio Kit V2.0
The FM Radio has controls for tuning and to adjust the volume. Includes an audio amplifier and output is via a 66mm speaker. Powered by batteries or mains. Teaching Resources.
-
2158 – 3W Class D Stereo Amplifier
This Class D Amplifier Kit can output up to 3W in total. It runs from 3.2V to 5.5V, and comes with a 3.5mm jack lead and 2 full range speakers. Teaching Resources.
-
2161 – Micro USB Lamp Kit – 1W LED V2.0
This kit allows you to build a mains powered lamp that takes power from a standard Micro USB phone charger. It uses a very bright 1W Power LED. Teaching Resources.
-
2162 – USB Fan Kit
This kit allows you to build a mains powered lamp that takes power from a standard Micro USB phone charger. It uses a very bright 1W Power LED. Teaching Resources.
-
2163 – Learning to solder LED kit, Pack of 25
The Learn To Solder pack is a cost effective way to teach soldering to a class of 25 that results in a testable product. Backed up by colour step by step guides. Teaching Resources.
-
2165 – Mono Amplifier Version 3.0
MP3 Mono Audio Amplifier Kit: supplied with a pre-built jack cable, an 8ohm 66mm speaker, and a AA battery pack, and uses an NCP2890 audio amplifier IC. Teaching Resources.
-
2167 – Kitronik Deluxe Rear Bike Light Kit
The Kitronik Deluxe Rear Bike Light Kit: An easy to build kit and is an excellent way to learn about the very popular 555 timer IC. The kit uses four ultra bright LEDs. Teaching Resources.
-
2168 – Kitronik Solar Power Starter Kit
Learn how to harness the energy of the sun in your Electronics and Design and Technology projects with our new Solar Power Starter Kit. Teaching Resources.
-
2169 – Kitronik Round 5V LED Matrix Lamp Kit
This round 5V LED matrix lamp Kit offers a really bright light, which is compact and easy to mount. The unit is supplied with 9 white super flux LEDs. Teaching Resources.
-
2173 Kitronik Mono Amp Kit with Power Switch and LED
This version of the mono amp kit also features an on board on/off switch and also a status LED that can lead to longer battery life without the need to remove batteries when not in use. Teaching Resources.
-
2175 Kitronik Solar Torch Kit
The Kitronik Solar Torch Kit has been developed for use in KS3 Design and Technology lessons. Learn about soldering, electronics, and renewable energy with one kit. Teaching Resources.
-
2176 Kitronik USB LED Strip Kit
The Kitronik USB LED Strip Kit with Power Switch, developed for use in KS3 Design and Technology lessons. Learn about soldering, electronics, and enclosure design. Teaching Resources.
-
2178 Kitronik USB Torch Kit
The Kitronik USB Torch Kit is a through-hole soldering kit developed for use in KS3 Design & Technology lessons. Learn about soldering, electronics, & enclosure design. Teaching Resources.
-
2179 Kitronik Stereo Amplifier Kit
This stereo amplifier kit uses 2 x FM8002A to give 1W per channel. Teaching Resources.
-
2180 Kitronik Deluxe Stereo Amplifier Kit
This kit features FM8002A mono amplifier ICs that output 1.5W per channel. Teaching Resources.
-
35137 Kitronik 5V Mini LED Lamp Module
The 5V Mini LED Lamp Module is the perfect board for anyone who wishes to design a low-power lighting enclosure, such as a desk lamp or accent light. Teaching Resources.
-
35150 Kitronik USB LED Strip with Power Switch
The Kitronik LED Strip with power switch, designed for low power lighting, such as desk lamps or accent lights. Its discreet size make it perfect for creative enclosures. Teaching Resources.
-
35157 Kitronik Round USB White LED Lamp
Round USB White LED Lamp with 5 LEDs, designed for low-power lightings such as desk lamps or torches. Its circular layout make it a great choice for creative enclosures. Teaching Resources.
-
35158 Kitronik Round USB RGB LED Lamp
The Round USB RGB LED lamp, designed for low-power lighting, such as mood lamps or accent lights. Its size and design make it a perfect option for creative enclosure designs. Teaching Resources.
-
35160 Kitronik White LED Keyring Torch Pre-built
This pre-built White LED Keyring Torch offers a perfect platform for custom enclosures. The user doesn’t have to assemble anything, it comes pre-built and ready to go. Teaching Resources.
-
35164 Kitronik Tricolour LED Board
The Kitronik TriColour LED board is a pre-built strip designed for low-power lighting displays, such as edge-lit signs. It can be powered via a desktop computer/laptop USB port. Teaching Resources.
-
35167 Kitronik Round Side Illumination LED Module
The pre-built Kitronik Round Side Illumination LED Module is designed for low-power lighting, such as desk lamps, accent lights. It can be powered vi a USB port. Teaching Resources.
-
3561 Kitronik USB RGB LED Strip with Pattern Selector
The RGB LED Strip is designed for low power lighting, such as mood lamps, edge-lit signs. Its size and layout make it perfect for creating custom lighting enclosures. Teaching Resources.
-
3562 Kitronik USB LED Strip with Light Sensor
The Kitronik LED strip with sensor is designed for use in enclosures for low-power lighting. The sensor makes it the perfect choice for an automatic night light or desk light. Teaching Resources.
3rd Party Teaching Resources
-
3723 – Picaxe Cyberpet kit
The cyberpet is programmed to make an electronic pet which responds to light or touch. Teaching Resources.
-
3724- Picaxe Alarm kit
A simple alarm can be made using the two inputs and LED and sounder outputs. Teaching Resources.
-
3725 – Picaxe Dice kit
Program this board to show a dice number when the switch is pressed. Teaching Resources.
-
3707- Picaxe Proto-Board kit
The PICAXE-08 proto board allows simple projects to be built. Teaching Resources.
-
3708 – Picaxe-18 Project Board kit
The board has 5 inputs and 8 outputs with Darlington drivers. Teaching Resources.
-
3718 – Picaxe-20 Project Board kit
The 20 pin board has 8 inputs and 8 outputs, perfect for larger projects. Teaching Resources.
-
2115BB – Boombox
The Boombox is designed to work with our Mono Amplifier kit. Boombox Presentations.
-
4501 – Stem Racer
The STEM racer allows students to investigate the effect of simple decisions. Scheme of Work.
DXF Cutting Files
-
2125 – Laser Cut it Yourself Tank kit
The Tank Kit uses the Motor Controller Board to drive two Bidirectional Motors, allowing the tank to move forward, backwards or spin on the spot. Cutting Files.
-
-
2143 – High Power Amplifier Case Cutting Files
Cutting files for our High Power Amplifier kit. Cutting Files.
-
-
Autodesk Models
-
2115 – MP3 amplifier kit
The mono amplifier kit uses a TBA820 to drive a speaker for use with MP3 players. You can use these files if you are using CAD to design a laser cut or 3D printed case. Autodesk Files.
-
2136 – Stereo amplifier
This stereo amplifier uses a TBA2822M IC to give 1W per channel. You can use these files if you are using CAD to design a laser cut or 3D printed case. Autodesk Files.
-
2106 – Rear bike light kit
Two high brightness red LEDs flash alternatively to making a rear bike light. You can use these files if you are using CAD to design a laser cut or 3D printed case. Autodesk Files.
-
2131 – Colour USB lamp kit
This board allows a colour changing LED to be powered from a PCs USB port. You can use these files if you are using CAD to design a laser cut or 3D printed case. Autodesk Files.
-
2120 – Colour changing night light
The LED automatically turns on when it goes dark and cycles through various colours. You can use these files if you are using CAD to design a laser cut or 3D printed case. Autodesk Files.
Discontinued Products Teaching Resources
-
2115 – Discontinued – MP3 amplifier kit
These notes are for use with the old mono amplifier kit. All new purchases will be for stock code 2154 later in the page. Teaching Resources.
-
2119 – Discontinued – Colour LED & battery box
A single sheet detailing how to connect a colour LED to a battery box. Teaching Resources.
-
2121 – Discontinued – Programmable timer
This timer can be programmed to set the duration and how the LED & buzzer work. Teaching Resources.
-
2124 – Discontinued – Motor controller
This board can be programmed to drive two motors with forward & reverse control. Teaching Resources.
-
2125 – Discontinued – Cut it yourself tank kit
Self assembly tank kits, fully programmable by adding a motor controller board. Teaching Resources.
-
2135 – Discontinued – FM radio kit
Tune in to your favourite radio stations with this FM radio kit. Teaching Resources.
-
2136 – Discontinued – Stereo amplifier
This stereo amplifier uses a TBA2822M IC to give 1W per channel. Teaching Resources.
-
2137 – Discontinued – Super capacitor charger
Portable power from a super capacitor. Teaching Resources.
-
2141 – Discontinued – Deluxe stereo amplifier
A deluxe version of the amplifier with volume control, power socket & power switch. You can use these files if you are using CAD to design a laser cut or 3D printed case. Autodesk Files.
-
2142 – Discontinued – Sound meter
The microphone on this kit detects noise and the louder it is the more LEDs light. Teaching Resources.
-
2147 – Discontinued – Shower timer
Reduce the amount of water used when showering with this timer. Teaching Resources.
-
2152 – Discontinued – Micro USB lamp
Reuse an old phone charger to to power this desk lamp via the micro USB connector. Teaching Resources.
-
2154 – Discontinued – MP3 amplifier kit
The mono amplifier kit uses anLM386 to drive a speaker for use with MP3 players. Teaching Resources.
-
2156 – Discontinued – Bump and Spin Kit
This board allows a buggy to be controlled; it can be programmed so that when it bumps in to something it reverses and spins. Teaching Resources.
-
2159 – Discontinued – Bump and Spin Buggy Kit
Bump and Spin buggy is an excellent introduction to robotics and programming using the popular PICAXE 08M2 chip. Teaching Resources.
-
2160 – Discontinued – Bluetooth Stereo Amplifier Kit
This amplifier kit can output up to 15W per channel into a pair of high quality speakers. Teaching Resources.
-
2164 – Discontinued – Wind-up Torch Kit
Our windup torch Kit is a great way learn about both electronics & alternative power sources and results in a highly useful finished item. No batteries required! Teaching Resources.