Chalk Board Effect Laser Acrylic 1.5mm x 600mm x 400mm

These chalkboard effect laser acrylic sheets measure 1.5mm x 600mm x 400mm. They can be laser cut and UV printed to create custom blackboards/message-boards for the home, workplace or in the classroom. They can be worked and thermoformed in the same way as standard acrylics.

When in use they can be written on with standard chalks and then wiped clean with a standard board eraser. The glossy side should be the rear of the blackboard and the matt side should be used as the chalk side.

Features:

• Create custom blackboards with a laser cutter or by hand working.
• Use standard chalk.
• Wipe clean with a standard blackboard eraser.
• They can be worked and thermoformed in the same way as standard acrylics.

Contents:

• 1 x Chalkboard Effect Laser acrylic sheets measuring 1.5mm x 600mm x 400mm.

Dimensions:

• Length: 600mm. (nominal)
• Width: 400mm. (nominal)
• Thickness: 1.5mm (nominal).

Video:

Tolerances:

• The manufacturing tolerance for the thickness of extruded acrylic sheets are the stated thickness +/-5%. This means a 1.5mm sheet could be between 1.43mm and 1.58mm in thickness.
• The manufacturing process for these sheets can lead to variances in length and width measurements between batches. Tolerances of up to +/- 1.7% are possible. The maximum we have recorded is plus 10mm to a length measurement.

Resources:

• Materials Safety Datasheet (MSDS).