Laser Materials Starter Pack

The Laser Materials Starter Pack has been carefully curated for those new to laser cutting and engraving. Whether you’ve purchased one of our range of Boxford Lasers, or have another Laser close by that you are new to, this pack will help you get a feel for a wide variety of different materials. We’ve ensured that everything in the pack, sheets and units, will fit into the work area of the smallest lasers on the market (A4). No fuss, unbox and laser!. And, if you look in the resources section at the foot of this page, you’ll see a short list of some of the free resources we’ve produced that you can use with the included products, perfect for inspiration and practice.

The pack contains a nice cross-section of our range, acrylics, plastics, woods, veneers, MDFs, and other laserable products such as slate, cork, and faux leather. There are 14 different products in the pack, and as some of the products are doubled up, that makes a total of 18 pieces. Each of the materials is supplied as A4 sheets, with the exception of the slate coasters, which are full-sized. The full list of included materials can be found in the Contents section, just below the list of features.

Features:

• The Laser Materials Starter Pack offers the new laser cutter user a broad selection of materials to try.
• All of the sheets are supplied as A4.
• The Slate coasters are supplied as units. 2 x round coasters and 2 x square coasters.
• The pack contains a nice cross-section of our range, acrylics, plastics, woods, veneers, MDFs, and other laserable products such as slate, cork, and faux leather.
• range, acrylics, plastics, woods, veneers, MDFs, and other laserable products such as slate, cork, and faux leather. There are 14 different products in the pack, and as some of the products are doubled up, that makes a total of 18 pieces.
• All of the supplied materials can be used on the smallest of the Boxford Lasers range that we stock.
• All are backed up with free resources, for both the classroom and the makers workshop/hackspace.

Contents (Each pack contains):

• 1 x 3mm White Perspex Sheet (Opaque).
• 1 x 3mm Black Perspex Sheet (Opaque.
• 1 x 3mm Clear Perspex Sheet (Cast).
• 1 x 1mm Clear PETG Sheet
• 1 x 1.5mm Laser Engraving Laminate Sheets.
• 1 x 4mm American Black Walnut Veneered MDF.
• 1 x 4mm Steamed Beech Veneered MDF.
• 2 x 3mm Panguaneta Poplar Laser Plywood.
• 2 x 3mm Laser Compatible Medite MDF.
• 1 x 4mm Oak Veneered MDF.
• 2 x Square Rough Cut Laser Engraving Slate Coasters.
• 2 x Round Rough Cut Laser Engraving Slate Coasters.
• 1 x Bay Brown Laserable Faux Leather.
• 1 x 3mm Laser Cork Sheet<./li>
• 1 x Introduction to Materials Booklet.
• 1 x A4 Delivery Carton (320x230x80).

Requires:

• A Laser Cutter.

Resources:

• Simple Keyring Makes for Teachers – Classroom Friendly Projects.
• Faux Leather Project – Making a Laser Cut Bi-fold Wallet.
• Make a Four-Compartment Stationery Holder with Value Acrylic.
• Making Laser Cut Desk Tidies.
• Sustainability in Maker Projects Ft. Cork.
• Big Page of Design and Technology Projects for Teachers.