0
Your Cart
0
Your Cart
large electro fashion switch coin cell holder

Electro-Fashion, Switched Coin Cell Holder

Stock code: 2711
Pricing:Ex VATInc VAT
1+£1.85
(excl. VAT)
£2.22
(excl. VAT)
10+£1.55
(excl. VAT)
£1.86
(excl. VAT)
500+£1.45
(excl. VAT)
£1.74
(excl. VAT)

In stock

Decrease product quantity. Increase product quantity.
Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Buy locally from a partner

SKU: 2711 Categories: , , Tags: , , , , Brand:

This specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread.

These are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off.

It uses a very thin PCB material to keep its size to a minimum. This allows it to be easily incorporated into your own e-textiles designs.

Caution: This coin cell holder contains Nickel and should not be used in designs where it will be in prolonged contact with the skin.

The board accepts CR2032 batteries.

Dimensions: L44 x W20 x H4.5mm

For more information and examples showing you how to use these parts in a e-textiles design visit our dedicated e-textiles section.

Related resources

How to Add 3 Standard LEDs to a Bag

How to Add 3 Standard LEDs to a Bag

Learn how to add three standard LEDs to a bag using conductive thread in our easy to follow tutorial.

How to Add a PCB LED to a Beanie Hat

How to Add a PCB LED to a Beanie Hat

Learn how to add a PCB LED to a beanie hat using conductive thread in our easy to follow tutorial.

Reviews

There are no reviews yet.

Be the first to review “Electro-Fashion, Switched Coin Cell Holder”

Your email address will not be published. Required fields are marked *

Questions and answers

    what is this made of?
  1. 0 votes
    Q what is this made of?
    Asked by james on May 28, 2019 12:00 am
    Answered by the admin Hi James, Thank you for your question they are made of nylon and then coated with silver then coated with another alloy to protect the conductive plating. Best Regards Cullen
    2. I have 3 4V 100mA ultraviolet leds can this circuit board that I purchased be used for them?
  2. 0 votes
    Q I have 3 4V 100mA ultraviolet leds can this circuit board that I purchased be used for them?
    Asked by Juan delgado on March 8, 2017 12:00 am
    Answered by the admin Hi Juan, This board would take a 3V coin cell battery and as such could only provide 3V maximum. The coin cell batteries also supply 200mA, and as such if 4 of the LED’s were connected and could supply enough voltage to turn them on, they would only last maybe 30 minutes before the battery was fully drained. You may be better with a power source such as this, https://kitronik.co.uk/products/4652-polymer-lithium-ion-battery-1ah.
    3. Hi. I ordered some LED lights and batteries but I would like to know how many lights I can run off of the switched coin cell holder and a 3V battery. Thank you
  3. 0 votes
    Q Hi. I ordered some LED lights and batteries but I would like to know how many lights I can run of...... Read more
    Asked by Evie on March 12, 2015 12:00 am
    Answered by the admin You can run around 4-5 of the Electro-Fashion Sewable LEDs off a three voltage coin cell battery. They need to be connected up in parallel for the coin cell to power them sufficiently.
    4. Hi, Have you got some form of technical data sheet for this product and its corresponding battery? Thanks Sam Wilkinson
  4. 0 votes
    Q Hi, Have you got some form of technical data sheet for this product and its corresponding battery...... Read more
    Asked by Sam Wilkinson on December 5, 2012 12:00 am
    Answered by the admin There isn't a datasheet for the holder, the dimensions are L44 x W20 x H4.5mm. Specifically what data were you looking for? The coin cell is 20mm across, 3.2mm high and has a capacity of 200mA/h. Again what did you need to know?
    5. Is this for the CR2032 size battery?
  5. 0 votes
    Q Is this for the CR2032 size battery?
    Asked by Ian Lewis on June 20, 2012 12:00 am
    Answered by the admin Yes it takes the CR2032 coin cell. A suitable coin cell is shown in the related products at the top left of the page.
    6. Hi, Have you got some form of technical data sheet for this product and its corresponding battery? Thanks Sam Wilkinson
  6. 0 votes
    Q Hi, Have you got some form of technical data sheet for this product and its corresponding battery...... Read more
    Asked by Sam Wilkinson on May 12, 2012 12:00 am
    Answered by the admin There isn't a datasheet for the holder, the dimensions are L44 x W20 x H4.5mm. Specifically what data were you looking for? The coin cell is 20mm across, 3.2mm high and has a capacity of 200mA/h.
To submit a question, please login or create an account

Related products